Single Wall Polyolefin Heat Shrink Tube

Halogen Free Thin wall Heat Shrinkable TubeEnvironment-friendly flame retardant heat shrinkable tube, using specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.The properties of environment-friendly, flexibility flame retardant, quick shrink and stable performance mark them widely used in the field of electronics, communication,automobile, and wildly applied for connecting or end-harding, electric wire, insulation and harness of electric wire, corrosion and rust-proof of metallic rods or tubes, antenna protection and marking for other products.Characteristics:1.Do not contain eight heavy metal elementsa and fourhalogen elements. Passed SGS test.2.Operating Temperature:-55～1253.Shrinkable Temperature: Start at 70,and shrunktotally at 110 (for thin wall);or 120(for normal wall),longitudinal shrink ratio:≤±5%.4. Flexible, flame retardant.5.The Available sizes form Φ0.6～Φ180mm,Can produce upon customer's special requirement.6. Easy for use, using oven or heating gun and it will shrink.7. Meet Sony and ROHS standard.Standard colors: Black, Red, Yellow, Green, Purple, Blue, Grey, BrownTechnical Data:PROPERTYTest MethodStandardPhysicalTensile Strength(MPa)GB/T1040≥10.4Elongation(%)GB/T1040≥200Tensile Strength after Aging(MPa)UL 224      158℃×168hr≥7.3Elongation after Aging(%)UL 224      158℃×168hr≥100Heat ResisitanceUL 224      250℃×4hrNo viscidity,      No crackingElectricalCold BlendUL 224      -30℃×4hrNo crackingDielectric Strength(kv/mm)GB/T1408≥15Dielectrc Withstand150VUL 224No breakdown for 1500V600VUL 224No breakdown for 2500VVolume resistance(Ω.cm)GB/T1410≥1×1014ChemicalAnti CorrosionUL 224      158℃×168hrPASSConpper stabilityUL 224      158℃×168hrPASSFlammabilityUL 224VW-1Environment Friendly CharacteristicsHazardous      elementTest MethodResult(mg/kg)Hazardous      elementTest MethodResult(mg/kg)CdEN1122:2001Method B≤5AsEPA 3052≤50PbEPA 3050 B≤90SeEPA 3052≤25SbEPA 3050 B≤60FEN 14582 Method B≤200BaEPA 3050 B≤1000ClEN 14582 Method B≤800CrEPA 3050 B≤5BrEN 14582 Method B≤800HgEPA 3052≤5IEN 14582 Method B≤200sizesAs Supplied(mm)After Recovery(mm)packaging m/rollI.D.Average W.T.Max.I.D.Average W.T.Φ1.01.50±0.30.12±0.05≤0.650.20±0.10200Φ1.51.90±0.30.13±0.05≤0.850.20±0.10200Φ2.02.35±0.30.15±0.05≤1.000.22±0.10200Φ2.52.80±0.40.15±0.05≤1.300.25±0.10200Φ3.03.40±0.40.15±0.05≤1.500.28±0.10200Φ3.53.80±0.40.15±0.05≤1.800.28±0.10200Φ4.04.40±0.40.18±0.05≤2.000.35±0.10200Φ4.54.70±0.40.18±0.05≤2.300.35±0.10200Φ5.05.50±0.40.18±0.05≤2.50.37±0.10100Φ6.06.50±0.40.20±0.05≤3.00.39±0.10100Φ7.07.5±0.40.18±0.05≤3.50.32±0.10100Φ8.08.5±0.50.18±0.05≤4.00.32±0.10100Φ9.09.5±0.50.18±0.05≤4.50.35±0.10100Φ10.010.5±0.50.18±0.05≤5.00.35±0.10100Φ1111.5±0.50.18±0.05≤5.50.40±0.10100Φ1212.5±0.50.20±0.05≤6.00.40±0.10100Φ1313.5±0.50.20±0.05≤6.50.40±0.10100Φ1414.5±0.50.20±0.05≤7.00.40±0.10100Φ1515.5±0.50.20±0.05≤7.50.40±0.10100Φ1616.5±0.50.22±0.05≤8.00.40±0.10100Φ1818.5±0.50.22±0.05≤9.00.45±0.10100Φ2020.5±0.50.22±0.05≤10.00.45±0.10100Φ2222.8±0.50.22±0.05≤11.00.45±0.10100Φ2525.5±0.50.22±0.05≤12.50.45±0.1050